Re: Stacking 2960-S and 2960-X
Yes. Thanks, I saw that. I did try the EX image on an S-series switch. At the end of the boot process, I received this:ip sla enable reaction-alerts ^ % Invalid input detected at '^' marker.The...
View ArticleRe: Stacking 2960-S and 2960-X
I tried searching as well but didn't see one for 2960-S. Is it possible that it's related to a licensing issue or need to change SDM preference?
View ArticleRe: Stacking 2960-S and 2960-X
I have LAN Base licensing on both switches, so I don't think that is it. I think you are on to something with the SDM preferences. I need to go back to the EX image for both. The 2960-X Switch Stack...
View ArticleRe: Stacking 2960-S and 2960-X
I loaded 15.0(2)EX4 C2960S-UNIVERSALK9-M image onto WS-C2960S-48TS-L switch. Booted withWS-C2960X-48LPS-L, same image, set as master with higher priority. This eliminated my version mismatch, but I...
View ArticleRe: Stacking 2960-S and 2960-X
Hi Frank what are the steps that you followed to resolve your issue after changing the SDM preference, am also haing the same issues..
View ArticleRe: show ip flow top-talkers
Hi, how do I reset and clear the top-talkers statistic (counter), something similar like when we can reset the ip accounting data by simply using command 'clear ip accounting'. Thanks
View ArticleRe: show ip flow top-talkers
Try clearing the interface and the stats should be cleared.
View ArticleRe: QoS Classification and Marking
Hello, nice posting :)I have one question. I have Cisco 3750 with configured L2 Trunk interface with command "mls qos vlan-based". On the other hand I have on this interface I have 2 Vlan's - one of...
View ArticleRe: QoS Classification and Marking
I’ve never done it on a trunk since I mostly just trust the DSCP markings on trunk interfaces. If you do not own the switch downstream then I definitely understand your concern. If I have to guess,...
View ArticleRe: Stacking 2960-S and 2960-X
Hi there!Do you think the C2960S-STACK will work in a C2960X-48TS-L switch? The fact is that I have 2 spare C2960S-STACK modules lying around and would like to use them with the X-Series...
View ArticleRe: Stacking 2960-S and 2960-X
According to the white paper, both stacking modules are different in sizes so it cannot be inserted into the wrong model. Please see the link below. Scroll down to the "What Are FlexStack and...
View ArticleRe: show ip flow top-talkers
How do I know the Protocol used? Only show the number. How can I decode that
View ArticleRe: show ip flow top-talkers
Sorry but I am not sure if there's a way to use NBAR with it.
View ArticleRe: Stacking 2960-S and 2960-X
Hi Andrew,Good to find your post to make my life easier. My existing stack is 2960s with 12.2(55)SE5, and the new switch is 2960x with 15(2)EX5, will the auto-graded be ok? Also the 2 commands should...
View ArticleRe: Stacking 2960-S and 2960-X
Ed, I am not sure if it will do an auto upgrade. Try it out and let me know. I do, however, believe that it won't since I would assume they have different codes in the IOS. We never mix up both models...
View ArticleRe: Alternative to Cisco Secure ACS – Using tac_plus
I'm trying to find the source code for the version of tac_plus that supports mysql for accounting. Any idea where that might be found these days? The link for it to Cisco's FTP server is no longer active.
View Article